Dr Hany Hassanin Bsc(Eng), PhD

 

Reserach Fellow

School of Mechanical Engineering

Contact details

Telephone +44 (0)121 414 4245

Email h.s.s.hassanin@bham.ac.uk

School of Mechanical Engineering
University of Birmingham
Edgbaston
Birmingham
B15 2TT
UK

About

Hany is a Research Fellow within the Micro-engineering and Nano-technology Research Centre situated in the School of Mechanical Engineering since 2010, University of Birmingham. He received PhD at University of Birmingham in 2010. Afterwards, he joined the University of Birmingham as team member of the micro engine project.

His current research can be summarised as modelling, fabrication, and characterisation of ceramic, metallic and nanocomposite net shape microparts, including the complex shape of the radial compressor and turbine.

Qualifications

  • BS.c (Eng.) in mechanical engineering, Cairo University, Egypt, 1999
  • MS.c in mechanical dynamics, Helwan University, Egypt, 2005
  • Ph.D in ceramic nanocomposite microcomponents, University of Birmingham, 2010

Research

Research Interests:

  • Microengines (PDF)
  • Soft lithography for forming ceramic and nanocomposite microcomponents (PDF)
  • Ceramic nanopattern generation using modified nanosphere lithography (PDF)
  • High aspect ratio SU-8 microstructures
  • Powder processing
  • Materials peroration and interpretation
  • Design, modelling and construction of experimental and production equipment
  • Mechanical dynamics and vibration
  • FEA Simulation

Publications

Journal Papers

  • Zhigang Zhu, Hany Hassanin and Kyle Jiang, "A soft moulding process for manufacture of net-shape ceramic microcomponents," International Journal of Advanced Manufacturing Technology 47, 147-152, 2010.
  • H. Hassanin and K. Jiang, "Functionally graded microceramic components," Microelectronic Engineering, vol. 87, pp. 1610-1613, 2010.
  • H. Hassanin and K. Jiang, "Optimized process for the fabrication of zirconia microcomponents," Microelectronic Engineering, vol. 87, pp. 1617-1619, 2010.
  • H. Hassanin and K. Jiang, "Fabrication of AI2O3/SiC composite microcomponents using non-aqueous suspension," Advanced Engineering Materials, vol. 11, pp. 101-105, 2009.
  • H. Hassanin and K. Jiang, "Alumina composite suspension preparation for softlithography microfabrication," Microelectronic Engineering, vol. 86, pp. 929-932, 2009.
  • Hany Hassanin, Younes Younes, Samir El-Demerdash and Al Adl Rabeih, "Road Humps Design Improvement Using Genetic Algorithms," SAE international, 2009-01-0466, 2009
  • Hany Hassanin, Younes Younes, Samir El-Demerdash and Al Adl Rabeih, " Active Suspension of Highway Truck Seat Using Genetic Algorithms," SAE international, 2008-01-1458, 2008.
  • Hany Hassanin, Younes Younes, Samir El-Demerdash and Al Adl Rabeih, " Influence of Road Speed Humps on Vehicle Ride Dynamics with Active Suspension Designed with GA," SAE international, 2007-01-2176, 2007.
  • Hany Hassanin, Younes Younes, Samir El-Demerdash and Al Adl Rabeih, “Performance of Passenger Car Dynamics Crossing Speed Control Hump" Engineering Research Journal of Helwan University, Cairo, ISSN 1110-5015, Vol. 90, pp. M50-M63, December 2003.

Conference papers:

  • H. Hassanin and K. Jiang, "Surface and geometry characterization of soft lithography thick moulds for net shape ceramic micro fabrication," Microelectronic Engineering, 2010.
  • H. Hassanin and K. Jiang, "Self replication of thick PDMS micro pattern using surfactants as release agents," Microelectronic Engineering, 2010.
  • H. Hassanin and K. Jiang, "Infiltration-processed, functionally graded Materials for microceramic components," The 23rd IEEE International Conference on Micro Electro Mechanical Systems (MEMS 2010).
  • H. Hassanin and K. Jiang, “Fabrication of zirconia/alumina nanocomposite microcomponents using colloidal powder processing and soft lithography," The 36th International Conference on Micro & Nano Engineering (MNE 2010), Genoa, Italy, 19 September to 22 September 2010.
  • H. Hassanin and K. Jiang, “Fabrication of free standing alumina micro components by pressurless slip casting in PDMS moulds," The 36th International Conference on Micro & Nano Engineering (MNE 2010), Genoa, Italy, 19 September to 22 September 2010.
  • H. Hassanin and K. Jiang, “Functionally graded microceramic components," The 35th International Conference on Micro & Nano Engineering (MNE 09), Ghent, Belgium, 28 September to 1 October 2009.
  • H. Hassanin and K. Jiang, “Optimized process for the fabrication of zirconia microcomponents," the 35th International Conference on Micro & Nano Engineering (MNE 09), Athens, Greece, 28 September to 1 October 2009.
  • H. Hassanin and K. Jiang, "Fabrication of near net shape alumina nickel composite micro parts using aqueous suspension," The 22nd IEEE International Conference on Micro Electro Mechanical Systems (MEMS 2009), pp. 721-724, 2009.
  • H. Hassanin and K. Jiang, “Alumina composite suspension preparation for softlithography microfabrication," the 34th International Conference on Micro & Nano Engineering (MNE 09), Ghent, Belgium, 15 September to 18 September 2008.
  • Hany Hassanin and Kyle Jiang, "Fabrication of Alumina Composite Microengine Parts using Softlithography," SAE international, 2009-01-0118, 2009.
  • Hany Hassanin, Younes Younes, Samir El-Demerdash and Al Adl Rabeih,"Evaluation of Local Humps and a New Hump Design" Egyptian Military technical faculty Conference, May 2006.

Back to top